Filter
Top Products
NETWORKSUPERVISION
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To fi nd your local offi ce contact details, go to
www.fl ukenetworks.com/contact.
©
2006 Fluke Corporation. All rights reserved.
Printed in U.S.A. 2/2006 2643388 D-ENG-N Rev A
What are ASEs?
ASEs (Analysis Service Elements) are data
collection and network performance monitor-
ing hardware devices placed on a wide area
network (WAN) or Local Area Network (LAN)
as part of the Visual UpTime Select system,
which offers in-depth, real-time, and historical
visibility into the performance of your
applications infrastructure. In the system,
data gathered by ASEs is stored in the Visual
UpTime Select server and displayed and ana-
lyzed from the Visual UpTime Select Web client.
As a service level management tool, ASEs
indicate when services are being met, provide
warnings when services start to degrade, and
send alerts when services are not met.
Hardware Warranties
Enhanced Gold, Bronze, and International
Gold ASE hardware warranty service programs
are available to help you maximize your
investment in Visual UpTime Select. For more
detailed warranty information, visit:
www.fl ukenetworks.com/visualcustomercare
Ordering Information
For more details, please contact your Visual
UpTime Select authorized reseller or
Fluke Networks Sales at (800) 240-4010
or (301) 296-2300.
T1 CSU/DSU ASE specifcations
General
Dimensions 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm)
Plastic case with internal power supply.
Weight 2.10 lbs.
Data Rate 1.544 Mbps synchronous
Timing Mode Derived externally from the T1 network or DSX-1
interface, or internally from the ASE.
Environment
Operating Temperature 0
o
to +40
o
C (+32
o
to +104
o
F)
Storage Temperature -20
o
to +55
o
C (-4
o
to +131
o
×F)
Clearance Requirement Minimum of 3” (7.62 cm) space on sides.
Operating and Storage
Humidity
10% to 90%, noncondensing
Power Requirements
Input 100 to 120 VAC
Frequency 50/60 Hz
Input Current Rating 0.5 amps
T1 Network Interface
Line Rate 1.544 Mbps ±50 bps synchronous
Line Format AMI or B9ZS line coding
Framing ESF or D4 framing formats
ESF FDL ANSI T1.403, AT&T TR54016, Both, or None
Input Signal 0dB to -36dB
Output Signal 0, -7.5dB, -15dB, -22.5dB LBO
Pulse Density AT&T 62411
Connector 8-pin modular jack—USOC: RJ48C
Timing Loop, DSX-1, or Internal
Channel Selection 1 to 24 channels in any combination
Network DTE Interface
(Data Port)
Confi guration DCE for interfacing with DTE
Data and Clock Leads ITU-T V.35
Signaling Leads EIA RS-232 (ITU-T V.28)
Data Rates 56 kbps x N or 64 kbps x N (N = 1 through 24)
HDLC Inversion Selectable V.35 data inversion
Transmit Timing Basis Network selected-source timing
Receive Timing Basis SCT, inverted SCT, SCTE
Receive Line Data Not Valid RLSD, CTS
Connector Female 34-pin V.35 connector
Serial Port Interface
Specifi cations 19200 or 9600 bps baud rate, 8 data bits no parity,
1 stop bit, EIA RS-232 DTE electrical format, RJ-45
connector
Ethernet 10/100BaseT
Interface
Bite Rate 10 or 100 Mbps
Connector 8-pin modular jack: RJ-48