Filter
Top Products
104 05-16000-0082-20050115 Fortinet Inc.
CLI commands FortiLog CLI reference
set report
Use set report to configure the FortiLog report settings.
set system
Use set system to configure the FortiLog system settings.
Table 10: set report command architecture
set report
resolve <services | aliases>
alias <alias> hostnetrange <x.x.x.x/n-y.y.y.y/n>
Commands Description
set report resolve <services | aliases
Select Resolve IP Ports to Service Name to view the port number by its
service name. For example, display HTTP rather than port 80
set alias hostnetrange <x.x.x.x/n-
y.y.y.y/n>
Set the alias name for the IP address of the host, network or the IP range.
Table 11: set system command architecture
set system
admin
username
<name_str>
password
<password_str>
<return>
permission {readonly |
readwrite}<return>
trusthost
<xxx.xxx.xxx.xxx> or
<0.0.0.0> for anyip
address
<xxx.xxx.xxx.xxx> or
<0.0.0.0> for anynet
mask <return>
status <enable |
disable>
dns
primary
{xxx.xxx.xxx.xxx |
none} <return>
secondary
{xxx.xxx.xxx.xxx |
none} <return>
hostname
<hostname_str>
<return>
interface
<intf_str>
config allowaccess
ping <return>
https <return>
ssh <return>
snmp <return>
http <return>
telnet <return>