Filter
Top Products
MR-8HD/CD Supplementary manual
Viewing the TOC information
You can view the TOC information of a burned disc both before finalizing and after
finalizing (for a disc burned by "Disk at once", you can view the TOC only after finalizing,
of course). It is recommended to check the remaining time (the recordable time left) from
the TOC information whenever you write an additional stereo WAV file in the "Track at
once" mode.
<TOC>: TOC stands for Table of Contents. TOC lists number of CD tracks, their starting
locations, playing time of each track on the disc, etc.
Viewing the TOC information before finalizing (only for a disc burned by "Track at once")
The following assumes that a disc contains a track burned by "Track at once" and has not yet
been finalized, while "CD Burn " is highlighted on the CD-RW screen.
1) Use the [MENU/ENTER] knob to select
"CD TOC
" and press the [MENU/ENTER] knob.
The display shows “Please Wait...”, followed by
the track number and playing time, as well as
the disc remaining time.
<Note>:
The following shows the screen ex-
ample when you burn multiple WAV files by
“Track at once”. You can check the playing time
of each track as well as the disc remaining time.
2) After viewing TOC, use the [MENU/ENTER] knob
to select "
Back" and press the
[MENU/ENTER] knob.
The display returns to the screen where
"CD TOC " is highlighted.
To burn an additional track by "Track at once"
after viewing the TOC information, select “CD
Burn ” and press the [MENU/ENTER] knob, then
select a desired stereo WAV file, as described
earlier (see page 11).
To finalize the disc after viewing the TOC infor-
mation, select "CD Finalize " and press the
[MENU/ENTER] knob (see page 11).
13