Filter
Top Products
15
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs
erratically, first press
CLEAR
and then
press
ON/OFF
twice. If nothing happens,
follow the steps below to reset it.
Warning: Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN.
In addition, resetting your BOOKMAN
unit erases settings and information
entered into its built-in book, and in any
installed books.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of your
BOOKMAN. Look for it on the battery
cover or near the book card slot.
This unit may change operating modes
due to electro-static discharge. Normal
operation of this unit can be reestablished
by pressing the reset key,
ON/OFF
, or by re-
moving or replacing batteries.
Changing the Settings
The type size, screen contrast, and
time of shutoff can be adjusted to suit
your needs using the Setup menu.
Set Type
changes the number of lines
of text that appear on the screen.
Set
Contrast
adjusts the screen to lighter
or darker shades.
The Set Shutoff
changes the time your BOOKMAN
stays turned on if you forget to turn it
off.
1. Press
CLEAR
or
MENU
.
2. Use the arrow keys to high-
light Setup.
3. Highlight Set Type Size, Set
Shutoff, or Set Contrast.
4. Press
ENTER
to select.
Or press or if you selected
Set Contrast
.
To exit without changing settings,
press
BACK
.
5. Press
ENTER
to select a setting.