Filter
Top Products
18
Changing the Battery
This product uses one CR2032, 3-volt lithium
battery. The battery should be changed when the
screen contrast is too light even after adjustment.
Before you replace the battery, you should have
a new battery and a small Phillips screwdriver on
hand.
Warning! If the battery completely loses power,
all the information stored in the phone list will be
permanently lost. Furthermore, any time that you
change the battery, you risk losing all your phone
list information, so always keep
written
copies of
your phone list information.
1. Using a Phillips screwdriver, unscrew and
remove the back cover.
2. Install a new battery, with its plus sign (+)
facing you.
3. Replace the back cover.
✓ Disabling the Demonstration
After changing the battery, the automatic
demonstration may appear when you turn
on the unit. To stop the demonstration,
press
CLEAR
. To disable the demonstration,
type
✽✽
d
at the
Enter a word
screen and
then press
ENTER
.
ncs-101Plus-02eng_A.pm65 6/25/03, 10:47 AM18