Filter
Top Products
7
FREECOM DUAL DRIVE NETWORK CENTER
Chapter: Hardware Installation
1. Connect the interface cable* to the Freecom Dual Drive Network Center.
2. Optional: Connect the cable of the power supply to the Freecom Dual Drive Network
Center and the power supply itself to the socket.
3. Connect the other end of the interface cable* to a network router.
Please note: Your router must be configured as a DHCP server. Further information on
setting up the DHCP server function of your router can be found in the manual of your
router.
4. Optional: if your device comes with a power switch, switch on the device before using
it.
* Please use the interface cables that come with your device (e.g. USB, eSATA, Firewire, LAN) for connecting
the device to your PC/Mac.
1. 2.
3. 4.
EN