Filter
Top Products
88
Freecom Storage Gateway (FSG)
GB
5
Note: To set up a homepage on your FSG, you will require two hosts, one
to access the FSG configuration and the other to access the homepage.
5.3 Setting up your own homepage on the FSG
You can set up one or more homepages on your FSG. They are accessed by entering the
dynamic DNS address. Please follow these steps to set up a homepage on the FSG:
Configuring the FSG
Open 'Services' ->'Dynamic DNS'.
• Select 'no-ip.com' as the service.
• Enter one of the hosts created in chapter 12.2 (e.g., fsg- 3forum.zapto.org).
Note: This host allows you to access your configuration page from the outside via HTTP/
FTP/SSH.
• Username: the e-mail address used to register at no-ip.com.
• Password: Your no-ip password.
• Repeat password: Re-enter your no-ip password.
To access the Configuration pages from the outside, you will first need to enable 'Open
HTTP Server to the outside' and 'Access for Configuration pages from the Outside' under
'Services' - 'HTTP Server'.