Filter
Top Products
About the Boards
Debug Board
10
i.MX27 PDK 1.0 Quick Start Guide, Rev. 1.0
Table 1.3 Debug Board SW4 Switch
Switch Setting Effect
SW4-1 UART Port Select ON Selects serial port UART (DCE) CON4
SW4-8 Power Enable ON Power is supplied to all three boards.
OFF Power is only supplied to the Debug
board.
Table 1.4 Boot Mode Setting (SW5–SW10)
Boot Mode
Device
SW5 Boot4
SW6
Boot3
SW7
SW8 SW9 SW10
UART/USB
bootloader
X0 0 00 0
8-bit NAND Flash
(2KB page) Ext
X0 0 01 0
3StackQS_WinCE.book Page 10 Friday, November 21, 2008 11:46 AM