Filter
Top Products
1.4
1.3 Quick Start
for PC users
1) Before you install your DynaMO, make sure that the IEEE1394 card is
properly installed. For information on how to install the IEEE1394
card, see the manual provided with it.
2) Execute the file "/Win98se/Setup.exe" in the DynaMO CD-ROM to
install the device driver. Now you can use the DynaMO (see Page 1.6).
3) Attach the IEEE1394 cable to the PC and DynaMO. The removable disk
icon will appear in My Computer (see Page 1.10).
4) We recommend that you eject the MO disk from the drive before
removing the DynaMO from your PC (see Page 1.13).
Notice:
If you are using your DynaMO with a laptop computer
or with multiple IEEE1394 devices, you must attach
the AC adapter before use. (see Page 1.10)
Important:
New Magneto-Optical (MO) disks are not formatted.
You must format the MO disk before use. Insert MO
disk to your DynaMO, right-click on the removable disk
icon and select [Format...]. Click the [Start] button to
formattheMOdisk(seePage1.18).
Formatting will delete all existing data on the MO disk.
✍
☞