Fujitsu 461V FA Computer Monitor User Manual


 
Color monitor 461V FA
8 - English A26361-K708-Z100-2-5E19
Installing an ergonomic video workstation
Before you set up your equipment you should select a suitable position for working at the monitor.
Please observe the following advises when installing a video workstation.
Window
permissible
reaching sector
600 mm
edge of desk
permissible
reaching sector
600 mm
Avoid direct and reflected glare. Avoid glare from electric
lighting.
Position the keyboard where it
is easiest to reach.
30°
30°
60°
60°
60°
permissible viewing sector
preferableviewing sector
permissible
viewing sector
approx. 90°
and
more
approx. 90°
Position the monitor for
optimum viewing. The viewing
distance to the monitor should
be approximately 50 cm.
Keep ventilated areas clear. Remember to maintain correct
posture.
Depending on the situation, the use of a swivel arm or wall bracket (VESA FPMPMI), which are
available from specialised dealers, may be advisable. For this purpose the monitor base must be
removed beforehand as described in chapter "Removing the monitor base".
Connecting the monitor
!
Please note the information provided in the "Safety" section in the chapter "Important
notes" at the beginning of this manual.
CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
Do not cover the ventilation openings of the monitor.
The computer power plug must be pulled!
Ê Be sure that the monitor and the computer are switched off.