Filter
Top Products
7
Secondary Master Submenu of the Main Menu
The Secondary Master submenu identifies the characteristics of the Secondary Master device installed.
Figure 3. Secondary Master Submenu
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field Options Default Description
Type:
■
Auto
■
None
[Auto] Selects the ATA/ATAPI device type. To change the selection, press
the spacebar. Select Auto to have the type automatically identified
by the BIOS at POST. If None is selected, all of the following Set-up
items do not appear.
■
Device
■
Vendor
■
LBA Mode
■
PIO Mode
■
Async DMA
■
Ultra DMA
–— These items are automatically determined by the system at POST
and display the characteristics of the Primary Master device. They
cannot be changed by the user.
Main
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Secondary Master:
v02.59 (C) Copyright 1985-2006, American Megatrends, Inc.
F1: Help Esc: Exit
Device :ATAPI CDROM
Vendor :MATSHITADVD-RAM UJ841S
LBA Mode :Supported
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-2
Type [Auto]
BIOS SETUP UTILITY
Main Menu