Filter
Top Products
6
LifeBook A Series BIOS
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what ATA devices are installed and the default values and settings of the devices.
Figure 2. Drive0 Master Submenu
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Note that the information displayed on this screen may differ from that which appears on your screen, depending upon
your system configuration.
Menu Field Options Default Description
The fields that appear on this screen are for display only, and reflect the default settings for the Drive0 device.
Device --- Hard Disk Displays the type of Drive0 ATA/IDE drive.
Vendor --- (Device Name) Displays the maker of the Drive0 device.
Maximum
Capacity:
--- (HDD Size) The maximum capacity of your hard disk
LBA Mode --- Supported Displays whether Logical Block Addressing is supported by the
device.
Block Mode --- 16 Sectors Displays the number of sectors per block.
PIO Mode --- 4 Displays the method for moving data to/from the Drive0 device.
Async DMA --- Multiword
DMA-2
Displays the Multiword DMA method for moving data to/from the
Drive0 device.
BIOS Setup Utility
Main Advanced Security Boot Info Exit
F1: Help Esc: Exit
v
v
v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive0:
Device :Hard Disk
Vendor :FUJITSU MHV2120AT PL
Maximum Capacity :120.0GB
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-5
S.M.A.R.T. :Supported
Type [Auto]