Filter
Top Products
ADA-16FX-ETHERNET
Chapter 3 Installation
© Fujitsu Microelectronics Europe GmbH - 7 - UG-960011-11
3.1 Jumper settings of ADA-16FX-ETHERNET
The following jumper settings are set by default:
Jumper
Description / Function Type Default
JP1 Use chip select line 2 solder JP 2pol. Closed
JP2 Use chip select line 3 solder JP 2pol. Open
JP3 Use chip select line 4 solder JP 2pol. Open
JP4 Select center tap A of Ethernet jack solder JP 3pol. 1-2
JP5 Select center tap B of Ethernet jack solder JP 3pol. 1-2
Please refer to the documentation of the evaluation board for detailed information about the
jumper settings for the SK-16FX-EUROSCOPE (SK-16FX-100PMC).