Filter
Top Products
26
LifeBook B Series BIOS
POWER MENU – SETTING POWER MANAGEMENT FEATURES
The Power menu allows you to set and change the power
management parameters. Follow the instructions for
Navigating Through the Setup Utility to make any
changes.
The following tables show the names of the menu fields
for the Power menu and its submenus, all of the options
for each field, the default settings and a description of
the field’s function and any special information needed
to help understand the field’s use.
Figure 16. Power Menu
POINTS
• In operating systems using ACPI, Auto-suspend
Timeout, Hard Disk Timeout, and Video Timeout
features are available exclusively through the
operating system.
• When resuming from a Save-to-Disk suspension there
will be a delay while the contents of system memory
and operating parameters are loaded from the hard
drive.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Item Specific Help
Select Power Management
Mode. Choosing modes
changes system power
management settings.
Maximum Power Savings
conserves the greatest
amount of system power
while Maximum
Performance conserves
power but allows
greatest system
performance. To alter
these setting, choose
Customize. To turn off
power management,
choose Disabled.
PhoenixBIOS Setup Utility
Power Savings: [Customized]
Hard Disk Timeout: [Off]
Display Timeout: [Off]
Standby Timeout: [4 Minutes]
Auto Suspend Timeout: [15 Minutes]
Suspend Mode: [Suspend]
Auto Save To Disk: [Off]
Resume On Modem Ring: [Off]
Resume On Time: [Off]
Resume Time: [00:00:00]
Advanced Features
▲
Main Advanced Security Power Boot Info Exit
CAUTIONS
• In Save-to-Disk mode there is no indication on the
Status Indicator to let you know you are suspended
rather than shut off from the power switch. You may
want to make a habit of always trying the Suspend/
Resume button before using the power switch.
• Resume-on-Modem ring when enabled will draw
power from the bridge battery alone when your
system is running off battery power. This may poten-
tially drain your bridge battery. Disabling Wake-on-
Modem ring will prevent this from happening.
Quilt-3 BIOS.fm Page 26 Monday, November 12, 2001 10:32 AM