Fujitsu B2630 Laptop User Manual


 
24
LifeBook B Series Notebook BIOS
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [
Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field Options Default Description
Supervisor
Password is:
–— Clear A display-only field. Set is displayed when the system supervisor password
is set and Clear when it is not.
User Password is: –— Clear A display-only field. Set is displayed when the general user password is set,
and Clear when it is not.
Set Supervisor Pass-
word
–— [Enter] Sets, changes or cancels Supervisor Password. Supervisor Password may be
up to seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press
[Enter] instead of entering characters in the Enter New Password field and
in the Re-enter New Password field. When a Supervisor Password is set it
must be used to access BIOS setup utility.
Set User
Password
–— [Enter] This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. A User Password may be up to
seven characters long and must include only letters or numbers (no sym-
bols). Passwords are NOT case-sensitive. To cancel a password press the
Enter key instead of entering characters in the Enter New Password field
and in the Re-enter New Password field. When a User Password is set it
must be used to access the setup utility.
Minimum User
Password Length:
–— [0] –—
Password on Boot: Disabled
First Boot
Every Boot
[Disabled] When set to Disabled, no password is required. When set to First Boot,
password entry is required only before first boot. When Every Boot is
selected, password is required every time the system is booted.
On Automatic
Wake up:
Disabled
Enabled
[Disabled] When Disabled, a password is not required on LAN or RTC automatic
wake up. When Enabled, password is required on automatic wake up.
Boot from
Removable Media:
All
Supervisor
only
[All] When Supervisor Only is selected, only the Supervisor can boot from
removable media. Only the user who enters the Supervisor Password
before OS boot is treated as the Supervisor. When All is selected, booting
from removable media is not restricted.
Floppy Disk Access: All
Supervisor
only
[All] When Supervisor Only is selected, only the Supervisor can access the
floppy disk. Only the user who enters the Supervisor Password before OS
boot is treated as a Supervisor. When All is selected, floppy disk access is
not restricted.
Hard Disk Security: –— –— Configures hard disk security features.
Owner Information: –— –— Sets Owner information.
Hard Disk Boot
Sector:
Normal
Write
Protected
[Normal] Sets protection mode for hard disk drive.
Security Panel
on Resume:
Disabled
Enabled
[Enabled] Allows you to enable or disable the Security Panel feature upon Resume
from Suspend.