Filter
Top Products
C120-H007-05EN 83
6.5 Distribution Panels
6.5 Distribution Panels
This section describes distribution panels.
6.5.1 Distribution panel location
(1) Computer room distribution panel
A distribution panel must be installed in the computer room to distribute power to the
server system components.
(2) Location
The distribution panel must be located near the entrance and where it will not interfere
with operation.
(3) Distribution panels for a larger system
For a larger system, distribution panels installed at several points in the room is
recommended.
6.5.2 Distribution panel breakers
A circuit breaker must be used in each branch circuit in the distribution panel.
Information about the number of branch circuits and circuit breaker capacitance is
available from Fujitsu.
A UPS over-current alarm could be issued if many components are turned on at the
same time. As such, sequential startup using multiple distribution panels is
recommended.