Filter
Top Products
4–1
CHAPTER 4 OPERATIONS
4.1 Turning on the Power
4.2 Reading a Document in Flatbed Mode
4.3 Reading Documents in ADF Mode
Documents can be read in the flatbed mode or automatic document feeder (ADF) mode. In the
flat-bed mode, each document is placed on the document bed and is read one by one. In ADF
mode, documents are fed and read automatically.
This section explains how to turn on the power and how to read documents.
CAUTION: Do not apply excessive force to the automatic document feeder (ADF) or place any
heavy objects on it. Doing so may lead to distortion of the scanned image.
NOTICE: If the “Check” indicator blinks in four seconds period, clean the ADF in accordance
with the section 5.3.
NOTICE: If the top 3 mm of the read area isn’t left blank (grounding color) by specifying a
drop-out color, read the document by selecting photo. Drop-out color is a color
which is used to the document but does not appear in the read image.
4.1 Turning on the Power
This section explains how to turn on the power.
Press “I” on the power switch. When the power is turned on, the
power indicator is lit.
Power OFF
Power ON
Press “O” on the power switch to turn off the power.
Power switch