Filter
Top Products
3
FBR211 SERIES
n SPECIFICATIONS
Item Standard (A or B type) High sensitive (C or E type)
Contact Arrangement 1 form C (SPDT)
Material Gold-overlay silver-palladium / gold-overlay silver
Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC)
Rating (resistive) 0.5 A 120 VAC or 1 A 28 VDC
Maximum Carrying Current 2 A
Maximum Switching Power 60 VA or 28 W
Max. Switching Voltage*
1
220 VAC or 150 VDC
Maximum Switching Current 1.25 A (AC) or 2 A (DC)
Minimum Switching load*
2
Plastic sealed 1 mA, 1V
(reference) Flux free 1 mA, 5V
Coil Nominal Power (at 20°C) Approximately 450 mW Approximately 200 mW
Operate Power (at 20°C) Approximately 315 mW maximum Approximately 140 mW maximum
Operating Temperature –25°C to +55°C (no frost) –25°C to +75°C (no frost)
Operating Humidity 45 to 85%RH
Time Value Operate (at nominal voltage) Maximum 5 ms
Release (at nominal voltage) Maximum 5 ms
Life Mechanical 5 × 10
6
operations minimum
Electrical 3 × 10
5
operations minimum (at 1 A/ 28 VDC resistive load)
(Refer to the REFERENCE DATA)
1 × 10
5
operations minimum (at 2 A/ 12 VDC resistive load)
1 × 10
5
operations minimum (at 0.5 A/120 VDC resistive load)
Other Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm)
Shock Misoperation 100 m/s
2
(11±
1
ms) 60 m/s
2
(11±
1
ms)
Resistance
Endurance 1,000 m/s
2
(11±
1
ms)
Weight Approximately 4 g
*
1
If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type
of load.
*
2
Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum
switching load varies with the switching frequency and operation environment.
Item Standard (A or B) High sensitive (C or E)
Isolation (initial) Minimum 100 MΩ (at 500VDC)
Dielectric
Strength
500VAC 1 min. (standard)
1,500VAC 1 min. (high isolation coil and contact)
n INSULATION
Type Compliance Contact rating
UL UL 110
E63615
Flammability: UL 94-V0 (plastics)
0.5A, 120VAC (resistive)
1A, 28VDC (resistive)
CSA C22.2 No. 14
LR 40304, LR 46016
n SAFETY STANDARDS