Filter
Top Products
fi-4110CU Image Scanner Operator’s Guide 1-3
Component Name Function
Copy density
dial
Adjusts copy density (dark/light) in five stages.
Function No.
display panel
Displays the Function No. or also displays the scanner
read mode as follows;
On: Single-side reading mode
Blink: Double-sided reading mode
Mark: An application is being activated
When the AC adapter is connected to the scanner or the
PC’s power is turned on, the initialization of scanner is
executed. The display on the panel changes as follows;
P ® 0 ® 1 (When 1 appears, scanner becomes ready)
Function button Selects a function to be started using this button.
This button’s function is set using Launch.
Duplex button Switches between read modes. You can confirm the
current read mode with the Function No. display panel.
Send to button Copies documents loaded in the document support.
Starts the operation specified by the Function button.
Scan button Scans the document placed in position.
Operator
panel
Power lamp Stays lit while power is being supplied.
Stacker Stacks the scanned documents.
Note:
Pressing the Send to or Scan button initiates the application software. The
mark is
displayed until the application software is ready. If the application software fails to get
ready and the function No. display is restored, the Send to or Scan processing is
canceled.