Filter
Top Products
68
5. Remove the Pick roller from the shaft while lifting up the tab on the Pick roller.
Pull out the shaft from the pick roller while lifting up its tab.
6. Attach the new Pick roller.
Insert the new Pick roller aligning the protrusion on the shaft with the slot for the screw in
the Pick roller.
ATTENTION
If you push up the pick roller tab using your fingernail, it may heart or
get chipped your fingernail. If you worry about that, you push up the
pick roller tab using a paper clip.
Tab
Shaft
Pick Roller
1
2
Protrusion Slot