Filter
Top Products
1.1 Turning the Scanner ON
fi-5530C Image Scanner Operator’s Guide 5
BASIC SCANNER OPERATIONS
1
2. Click [Power Control] button
⇒ The following screen is displayed.
3. In this screen,
• To power on/off the scanner by pressing the Power button:
⇒ Select "Enable power switch".
• To power on/off the scanner by connecting/disconnecting the AC cable:
⇒ Select "Disable power switch".
■ Power Save Mode
The Power Save mode keeps the scanner in a low-powered state if no operation is performed on the
scanner for 15 minutes after it has been turned ON. The scanner is automatically switched to the
Power Save mode.
In the Power Save mode, the indication of the Function Number Display on the operator panel goes
out, while the green LED is kept lit.
To return the scanner from the Power Save mode, perform one of the following operations:
• Load documents on the ADF paper chute.
• Press any button on the operator panel.
The scanner will be turned OFF when pressing down the power button for two seconds.
• Execute a command from the scanner driver.