Filter
Top Products
fi-553PR Imprinter Operator’s Guide | 7
2.3. Operation Test
After installing the Imprinter, check if the printing operation
can be done in the Offline Print Test mode of the scanner.
1. While pressing [Function] button on the operator
panel, press button.
Keep pressing [Function］ button.
2. Release [Function] button when the Function
Number Display changes from [P] to [b].
3. Place a blank document on the ADF paper chute.
A
TTENTION
● Use A4 or Letter size paper. If the size is
smaller than A4 or Letter, printing may not be
completed successfully.
● Confirm that the Print Cartridge is positioned
within the document width.
4. Press [Scan] button.
ÖThe paper is fed into the ADF. Test pattern 1 (c of
the right figure) is printed on the paper starting 5mm
(the range of error is ±4mm) from its leading edge.
HINT
There are following print test patterns:
Test pattern 1
(c) (Horizontal):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`0000
0000
Test pattern 2
(2) (Horizontal):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test pattern 3
(3) (Horizontal):
!”#$%&()*+,-./0123456789:;<=>?@00000000
Test pattern 4
(4) (Vertical):
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`00000000
Test pattern 5 (5) (Vertical):
abcdefghijklmnopqrstuvwxyz{|}~ 00000000
Test pattern 6
(6) (Vertical):
!”#$%&()*+,-./0123456789:;<=>?@00000000
When multiple sheet of documents are set on the
ADF, the Test print repeats the Pattern from 1 to 6.
The numbering data portion ”00000000” changes
from 0 (Zero) with increment of 1(one).
5. To stop Offline Print Test mode, press button.
The scanner will be turned off.
Function Number Display
Function
Function
Function
Send to
Scan
5m
m
Feeding direction
Test pattern print sample
6
5
4
3
2
c