Filter
Top Products
2-6
Now the installation of the scanner driver is
completed.
ScandAll 21 is an imaging software, conform-
ing with the TWAIN standards. With the
FUJITSU TWAIN 32 scanner driver you can
capture scanned image data from the s c a nn e r.
7.
Select a language used for installa-
tion on [Choose Setup Language]
window and click [OK].
8.
Install the application following the
instructions on the window.
9.
When the [InstallShield Wizard Com-
plete] window appears, click [Finish].
10.
Your computer is restarted and the
scanner will be detected.
Do not remove the Setup
CD-ROM from the CD drive until your PC
will be completely restarted.
ATTENTION
Depending on the OS, the following
operations may be necessary.
For Windows 98:
When a request for inserting the CD-
ROM of Windows 98 appears, insert it
into the CD drive and click the [OK]
button.
For Windows 2000:
When [Digital Signature not Found]
appears, click [Yes].
For Windows XP
1. When [Found New Hardware Wizard]
appears, confirm that the Setup
CD-ROM is set in the CD drive, then
click the [Next] button.
2. When any alarm is displayed on [Hard-
ware Installation] window, click the
[Continue Anyway] button.
3. Click the [Finish] button.
ATTENTION
For confirming if the installation was
successful, perform a scanning operation
by using an application that complies with
the TWAIN standard such as ScandAll
21.
Installing ScandAll 21
ATTENTION
When using Windows NT 4.0, Windows
2000 and/or Windows XP, please login as
a user with "Administrator" privileges
(privileges of the administrator of your
PC).
1.
Insert the Setup CD-ROM in your CD-
drive
The, <SETUP DISK STARTUP SCREEN>
will be displayed.
2.
Click [Install Products].