Filter
Top Products
6
Make sure to ground the scanner.
Make sure to ground to avoid electric shock. Be
sure to ground before plugging into a Power
outlet.
Unplug from the outlet before removing the
ground connection.
Use the scanner only at the indicated
power voltage. Do not connect to
multiple-power strips.
Use the scanner only at the indicated power
voltage and current. Improper power voltage or
current might cause fire or electric shock. Do
not connect to multiple-power strips.
Do not touch the Power cable with
wet hands.
Do not touch the power plug with wet hands.
Doing so might cause electric shock.
Wipe off any dust from the power
plug.
Wipe off any dust from the metal parts on the
power plug or metal fittings with a soft, dry
cloth. Accumulated dust might cause fire or
electric shock.
Do not install the scanner in a
location that has oil smoke, steam,
humidity, and dust.
Do not install the scanner in a location subject
to oil smoke, steam, humidity, and dust. Doing
so might cause a fire or electric shock.
Do not use the scanner if there is a
strange odor.
If you detect excessive heat coming from the
scanner or detect smoke, strange smells or
noises during the operation, immediately
disconnect the power plug from the Power
outlet. Before contacting the store where you
bought the scanner or an authorized FUJITSU
scanner service provider, make sure that any
smoke coming from it has completely stopped.
Never try fixing such problems by yourself.
Doing so is dangerous.
Disconnect the power if the scanner
is damaged.
If the scanner is damaged for any reason,
immediately disconnect the power plug from
the Power outlet. Then, contact the store where
you bought the scanner or an authorized
FUJITSU scanner service provider.
Do not put liquids inside the scanner.
Do not insert or drop any metal objects into the
ADF slot or ventilation ports on the scanner.
Do not scan any wet documents or documents
with paper clips or staples attached.
Do not splash or allow the scanner to get wet.
If foreign objects (water, small metal objects,
liquids, etc.) get inside the scanner, immedi-
ately disconnect the power plug from the Power
outlet. Then, contact the store where you
bought the scanner or an authorized FUJITSU
scanner service provider. Pay particular atten-
tion to this warning in households where there
are small children.
Unplug the scanner when a trouble
occurs.
Immediately unplug the scanner when a trouble
occurs.
Never cut the ground connection until the
scanner is unplugged from the Power outlet.
Do not disassemble the scanner.
Do not take apart or modify the scanner. The
inside of the scanner contains high-voltage
components.
Touching these components might cause
electric shock or fire.
Do not use aerosol or alcohol sprays
near the scanner.
Do not use any flammable substance or alcohol
based cleaning sprays (such as aerosol
sprays) to clean the scanner.
Sparks, caused by static electricity, generated
when blowing off dust and dirt from the outside
of the scanner, may cause a fire.
Do not place the scanner within the
reach of small children.
To avoid injuries, do not place the scanner in
an area where small children may be able to
reach.
Do not touch the heated section for a
long time.
Do not touch the heated section such as the
bottom of the scanner for a long time.
Doing so may cause a low-temperature burn on
your skin.
Do not cover the scanner with
something during its operation.
Do not use the scanner while covered with a
blanket, etc. Doing so may raise the tempera-
ture inside and cause a fire.
Do not use the scanner where it gets
wet.
Do not use the scanner at a place such as a
bathroom, shower room, or swimming pool
where it may easily get wet. Doing so might
cause electric shock or fire.