Fujitsu FI-7280 Scanner User Manual


 
3
z User’s Guide
Includes Safety Precautions, Getting Started,
Operator's Guide, and fi-718PR Imprinter
Operator's Guide.
z Scanner Central Admin Agent
Used to centralize the management of multiple
scanners, by allowing you to apply firmware
updates simultaneously, monitor the operating
status, and check the scanner information.
Note that required applications will differ
depending on the form of operation.
For details, refer to the Scanner Central Admin
User’s Guide.
The system requirements are as follows.
*1: The software operates as a desktop
application.
*2: Required disk space varies according to the
file size of the scanned images.
Install the bundled software from the Setup DVD-
ROM in the following procedure.
Note that there are two ways to install the bundled
software: select [Installation (Recommended)] to
install all the software required to operate the
scanner, or [Installation (Custom)] to select and
install the software as needed.
System Requirements
Operating
system
z
Windows
®
XP Home Edition
(Service Pack 3 or later)
z
Windows
®
XP Professional
(Service Pack 3 or later)
z
Windows
®
XP Professional x64 Edition
(Service Pack 2 or later)
z
Windows Vista
®
Home Basic
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Vista
®
Home Premium
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Vista
®
Business
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Vista
®
Enterprise
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Vista
®
Ultimate
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Server
®
2008 Standard
(32-bit/64-bit)
z
Windows Server
®
2008 R2 Standard
(64-bit)
z
Windows
®
7 Home Premium
(32-bit/64-bit)
z
Windows
®
7 Professional
(32-bit/64-bit)
zWindows
®
7 Enterprise (32-bit/64-bit)
z
Windows
®
7 Ultimate (32-bit/64-bit)
z
Windows Server
®
2012 Standard
(64-bit) (*1)
z
Windows
®
8 (32-bit/64-bit) (*1)
z
Windows
®
8 Pro (32-bit/64-bit) (*1)
z
Windows
®
8 Enterprise (32-bit/64-bit)
(*1)
CPU
Intel
®
Pentium
®
4 1.8 GHz or higher
(Recommended:
Intel
®
Core™ i5 2.5 GHz or higher,
except mobile device processors)
Hard disk
drive
5,400 rpm or more
(Recommended: 7,200 rpm or more)
Memory
1 GB or more
(Recommended: 4 GB or more)
Display
resolution
1024 × 768 pixels or more,
65,536 colors or more
Hard disk
space
2.2 GB or more of free hard disk space
(*2)
DVD drive
Required for installing the software
Interface USB3.0/2.0/1.1
ATTENTION
zIf the system requirements above are not
satisfied, the scanner may not operate.
zScanning speed will slow down in the following
cases:
- The CPU or the memory does not meet the
required specifications
- The version of the USB port or the USB hub
is USB 1.1
HINT
The screenshots used in this manual are of
Windows
®
7. The actual windows and
operations may differ depending on the
operating system.
Where there is no distinction between the
different versions of the operating system
shown in the table of system requirements, the
general term Windows
®
is used.
Installing the Bundled Software
ATTENTION
If an old version of the software is installed
already, uninstall it first.
For details about the uninstallation procedures,
refer to "A.5 Uninstalling the Software" in the
Operator's Guide.