Filter
Top Products
The monitor cable connector is a DB 15 HD type. You will need a monitor conversion connector
(available separately) to attach a Sun monitor that has a different shape connector. Make sure
you connect it in the correct orientation and use the fixing screws to hold it in place. It may
cause trouble if it is not connected properly.
The [POWER] LED on the front panel flashes if the AC cord comes unplugged, reminding you
to reconnect it.
Cascaded connections must be setup exclusively with our KVM switches only. You cannot
make these connections with switches produced by other manufacturers.
A maximum of two levels of cascaded connections are allowed (including the master).
Attempting to cascade three or more levels will not work.
4