Filter
Top Products
3
FTP-627USL401/402
nSPeCiFiCaTiONS
*+5˚C to +40˚C printing density assurance range.
Item Specication
Iterface Conforms to USB/Serial
Power
supply
For print head 24 VDC average current, 0.5A (0.9A peak)
(print ratio: 12.5%, print speed 100mm/sec.)
For motor 24 VDC ±5%, 0.9 A maximum
For cutter 24 VDC ±5%, 1.1 A maximum
For logic 4.75 to 5.25VDC, 0.5 A maximum
Dimensions Mechanism and board 100 x 94 x 108 mm (WxDxH)
Weight Mechanism and board Approximately 310g
Life Head
Cutter
Pulse durability: 50 million pulses/dot (under our standard
conditions); Abrasion resistance: paper traveling distance
50km (print ratio: 12.5% or less).
500,000 cuts (20 cuts/minute)
MTBF Mechanism 3,000 hours
Circuit board 500,000 hours
Operating
environment
Operating temperature* 0ºC to +50ºC
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -20ºC to +60ºC (paper not included)
Storage humidity 5 to 95% RH (no condensation)
Detection
function
Head temperature detection Detected by thermistor
Paper out/mark detection Detected by photo-interruptor
Platen release Detected by sliding switch
Recommended thermal sensitive paper High sensitive paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper),
FTP-020PU001 (58mm)
PD105R (Oji paper)
FTP-020P0701 (58mm)
Medium life paper TF60KS-F1 (Nippon paper)
FTP-020P0102 (58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
Long life paper PD160R (Oji paper)
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)