Filter
Top Products
Showing/Hiding Host Names
[Show Host Name Function]
When the device is operating in normal Console Mode, holding the <Shift> key down and pressing the <Scroll
Lock> key twice causes the host name for the currently selected channel to be shown in the top-left of the screen.
If the host name is being displayed, holding the <Shift> key down and pressing the <Scroll Lock> key twice again
causes the host name to disappear from the screen.
The factory default is for the host name to not be shown.
The host name is not shown when Hot Key Mode is active.
While in the Hot Key Mode, holding the <Shift> key down and pressing the <Scroll Lock> key twice will not cause
the host name to be shown/hidden.
The current Show/Hide Host Name state is retained after switching the host via selector buttons or OSD.
If a FS-10x series device (previous model) is used in a cascaded setup, some or all of the host names may not be
displayed, depending on the exact setup used:
● If a device that is not capable of showing host names is used as the master device, no host names will be
shown.
● If a device that is not capable of showing host names is used as a slave device, no host names will be shown
for the channels of that device.
18