A SERVICE OF

logo

C141-E078-02EN
4 - 12
4.3.2 Interface connector
The connector for the fibre channel loop bus is an unshielded SCA-2 connector conforming to
SCSI-3 type which has two 20-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.12 shows the
fibre channel connector. See Section C.5 in Appendix C for signal assignments on the connector.
For details on the physical/electrical requirements of the interface signals, refer to Sections 1
Interface Specifications.
Figure 4.12 SCA2 type interface connector
4.3.3 Recommended components for connection
Applicable model Name Par number Manufacturer
MAF3364FC
MAG series
Interface connector
(CN1)
Connector 787317-1 AMP
ESD contact