Filter
Top Products
3.1 Control/Sense Commands
C141-E167 3 -
49
Page Code Description Parameter Pointer
00 Supported Log Pages Ignored
01 Buffer Overrun / Underrun Page Supported
02 Write Error Counter Page Supported
03 Read Error Counter Page Supported
05 Verify Error Counter Page Supported
06 Non-medium Error Page Should be zero
0D Temperature Page Supported
0E Start-stop Cycle Counter Page Supported
0F Application Client Log Page Supported
10 Self-Test Result Log Page Supported
2F SMART Status Page Ignored
38 SMART Data Page Ignored
The "Parameter Pointer" field allows the application client to request parameter data beginning from
s specific parameter code to the maximum allocation length or the maximum parameter code
supported by the target, whichever is less. If the value of the "Parameter Pointer" field is larger than
the largest available parameter code known to the device server for the specified page, the device
server terminates the command with CHECK CONDITION status (ILLEGAL REQUEST [=5] /
Invalid field in CDB [=24-00]).
The "Parameter List Length" field in the CDB specifies the total number of bytes of log parameter
which can be transferred to the INIT by this command. The IDD transfers the number of bytes of all
log parameters specified in the "Page Code" field or the portion of log parameters with the length
specified in the "Parameter List Length" field, whichever is smaller. When zero is specified in the
"Parameter List Length" field, this command is terminated without anything being transferred.
3.1.18 PERSISTENT RESERVE IN (5E)
Bit
Byte
76543210
0X'5E'
1 0 0 0 Service Action
200000000
300000000
400000000
500000000
600000000
7 Allocation Length (MSB)
8 Allocation Length (LSB)
90000000Link