Filter
Top Products
MB3788
7
■ ABSOLUTE MAXIMUM RATINGS
*: Value obtained when mounted on 4 cm × 4 cm double-sided epoxy substrate
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
(T
A
= +25°C)
Parameter Symbol Conditions
Ratings
Unit
Min Max
Supply voltage V
CC
——
20 V
Control input voltage V
ICTL
——
20 V
Allowable loss P
D
Ta ≤ +25°C
—
500* mW
Operating ambient temperature T
OP
—
-30 +85 °C
Storage temperature T
stg
—
-55 +125 °C
(T
A
= +25°C)
Parameter Symbol Conditions
Values
Unit
Min Typ Max
Supply voltage V
CC
—3.66.018V
Reference voltage output current I
OR
—-1—0mA
Error amplifier input voltage V
I
—-0.2—V
CC
- 1.8 V
Error amplifier input voltage V
I
—-0.2—V
CC
V
Control input voltage V
ICTL
—-0.2—18V
Output current I
O
—3.0—30mA
Operating frequency f
osc
— 100 300 1000 kHz
Operating ambient temperature T
op
— -30 25 85 °C