Filter
Top Products
6.5 Packaging
C141-E252 77
6.4.4 Troubleshooting with parts replacement in the factory
This manual does not cover troubleshooting at the factory level.
6.4.5 Finding possibly faulty parts
Finding possibly faulty parts in the field was explained in Subsection 6.4.2. This manual does not
cover finding possibly faulty parts at the factory level.
6.5 Packaging
When the HDD is returned to Fujitsu, the following methods are recommended.
6.5.1 Unitary packaging
Figure 6.2 Unitary packaging
(1) Put the HDD into FCELL.
• At this time, the connector of the HDD is directed to the hinge side of FCELL.
• The PCBA is put in the side with the material mark of FCELL.
(2) Push from two corners of FCELL on the hinge side previously, push two corners of the opening next,
and lock FCELL surely.