Fujitsu MHC2032AT Computer Drive User Manual


 
Contents
xiv C141-E050-02EN
Table 3.1 Surface temperature measurement points and standard values
3-6
Table 3.2 Cable connector specifications 3-9
Table 4.1 Self-calibration execution timechart 4-9
Table 4.2 Write precompensation algorithm 4-10
Table 5.1 Signal assignment on the interface connector 5-3
Table 5.2 I/O registers 5-7
Table 5.3 Command code and parameters 5-14
Table 5.4 Information to be read by IDENTIFY DEVICE command 5-
32
Table 5.5 Features register values and settable modes 5-38
Table 5.6 Diagnostic code 5-43
Table 5.7 Features Register values (subcommands) and functions 5-54
Table 5.8 Format of device attribute value data 5-56
Table 5.9 Format of insurance failure threshold value data 5-57
Table 5.10 Contents of security password 5-61
Table 5.11 Contents of SECURITY SET PASSWORD data 5-65
Table 5.12 Relationship between combination of Identifier and Security
level, and operation of the lock function 5-66
Table 5.13 Command code and parameters 5-68
Table 5.14 Parallel generation equation of CRC polynomial 5-90
Table 5.15 Recommended series termination for Ultra DMA 5-91
Table 5.16 Ultra DMA data burst timing requirements 5-97
Table 6.1 Default parameters 6-7