Fujitsu MHC2032AT Computer Drive User Manual


 
C141-E050-02EN i
Preface
This manual describes the MHC Series and MHD Series, 2.5-inch hard disk drives.
These drives have a built-in controller that is compatible with the ATA interface.
This manual describes the specifications and functions of the drives and explains in
detail how to incorporate the drives into user systems. This manual assumes that
the reader has a basic knowledge of hard disk drives and their implementations in
computer systems.
This manual consists of seven chapters and sections explaining the special
terminology and abbreviations used in this manual:
Overview of Manual
CHAPTER 1 Drive Overview
This chapter gives an overview of the MHC Series and MHD Series and describes
their features.
CHAPTER 2 Drive Configuration
This chapter describes the internal configurations of the MHC Series and MHD
Series and the configuration of the systems in which they operate.
CHAPTER 3 Conditions Installation
This chapter describes the external dimensions, installation conditions, and switch
settings of the MHC Series and MHD Series.
CHAPTER 4 Theory of Drive Operation
This chapter describes the operation theory of the MHC Series and MHD Series.
CHAPTER 5 Interface
This chapter describes the interface specifications of the MHC Series and MHD
Series.
CHAPTER 6 Operations
This chapter describes the operations of the MHC Series and MHD Series.
Terminology
This section explains the special terminology used in this manual.
Abbreviation
This section gives the meanings of the definitions used in this manual.