Fujitsu P310 Personal Computer User Manual


 
3
Setting Up the PC
CAUTION
When installing your PC, give consideration to the recommendations and safety notes.
Set up the PC only in its correct orientation. The points to observe are illustrated on the following
pages.
We recommend that you place your equipment on a surface with good anti-slip qualities. In view
of the multitude of different finishes and varnishes used on furniture, it is possible that the rubber
feet of the devices will mark the surface they stand on.
Do not expose the PC to extreme environmental conditions (see chapter "Technical data") and
protect it from dust, humidity and heat.
Provide at least 200 mm of clearance on the left, in front of and behind the ventilator area of the
system unit to ensure adequate ventilation. Do not cover the ventilation areas of the monitor and
the system unit.
Do not place several system units one above the other.
Connect the Monitor, Mouse and Keyboard
The ports for monitor, mouse and keyboard are on the rear and on the front of the system unit.
PS/2 keyboard port / purple PS/2 mouse port / green
Monitor port / blue USB port / black
Connecting the keyboard
Connecting standard keyboard
Use the supplied keyboard cable only.
Plug the round keyboard cable connector into the port marked with this symbol on the
system unit.
CHAPTER 1 Washingtons (01-10) 12/8/03, 11:39 AM3