Filter
Top Products
5
■ Connecting the PC to the Mains Voltage
1 Notch for inserting the screwdriver
If the power supply of your PC does not have a slide-in or plug-in element for setting the rated
voltage, then your system automatically sets itself to the local rated voltage. If you have a PC with
a slide-in or plug-in element, then you must match the set rated voltage to the local rated voltage.
Check the voltage setting.
CAUTION
Devices with main power switch:
The value indicated with an arrow must be compatible with the local rated voltage:
• 115 = 100 V to 127 V
• 230 = 200 V to 240 V
If the voltage setting is incorrect, then lift out the manual voltage adjuster with a screwdriver (1),
turn it to the required setting and reinsert it.
Devices without main power switch:
The visible value must agree with the local mains voltage:
• 115 = 100 V to 127 V
• 230 = 200 V to 240 V
If an incorrect mains voltage is set, push the slide switch all the way into the other possible position
with a pointed object.
200 V - 240 V
200 V - 240 V
100 V - 127 V
100 V - 127 V
a
a
a = Notch for inserting the screwdriver
3 Check the voltage setting.
CHAPTER 1 Washingtons (01-10) 12/8/03, 11:39 AM5