Filter
Top Products
fi-590PRF Imprinter Operator’s Guide | 1
Introduction
Thank you for purchasing the fi-590PRF Imprinter
option for fi-5900C Color Image Scanner.
This guide explains how to install and use the imprinter.
(For further details about the functions and operations of
fi-5900C Image Scanner, refer to the “fi-5900C Image
Scanner Operator’s Guide” included in fi-5900C Setup
CD-ROM.)
This guide also contains other important information, such
as procedures for replacement of consumables. Keep this
guide in a convenient and safe place so that you can refer to
it whenever necessary.
We hope this manual will be helpful in your future use of the
fi-590PRF Imprinter.
Manufacturer
PFU LIMITED
Imaging Products Division,
Image Products Sales Dept., Products Group
Solid Square East Tower
580 Horikawa-cho
Saiwai-ku, Kawasaki-shi
Kanagawa 212 - 8563
Japan
Phone: +81 (44) 540 - 4538
Trademarks
Microsoft, Windows, and Windows NT are
registered trademarks of Microsoft Corporation in
the United States and/or other countries.
Other product names are the trademarks or
registered trademarks of the respective companies.
How Trademarks Are Indicated In This
Manual
References to operating systems (OS) are indicated
as follows:
Windows 95: Microsoft
®
Windows
®
95 operating
system.
Windows NT 4.0:
Microsoft
®
Windows NT
®
Server
operating system version 4.0,
Microsoft
®
Windows NT
®
Workstation
operating system version 4.0.
Windows 98: Microsoft
®
Windows
®
98 operating
system.
Windows Me: Microsoft
®
Windows
®
Millennium
Edition operating system.
Windows 2000: Microsoft
®
Windows
®
2000
Professional operating system.
Windows XP: Microsoft
®
Windows
®
XP
Professional operating system,
Microsoft
®
Windows
®
XP Home
Edition operating system.
Where there is no distinction between the different
versions of the above operating system, the general
term "Windows" is used.
Regulatory Information
FCC declaration
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna..
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
located.
- Consult your dealer or an experienced radio/TV
technician.
FCC warning: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
Canadian DOC Regulations
This digital apparatus does not exceed the Class A
limit for radio noise emissions from digital apparatus
set out in the Radio interference Regulations of the
Canadian Department of Communications.
This Class A digital apparatus complies with
Canadian ICES-003.
Le pésent appareil numérique n’ément pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A prescridtes dans
le Réglesment sur le brouillage radioélectrique dicté
par le ministere des Communications du Canada.
Cet appareil numérique de la classe A est conformme
à la norme NMB-003 du Canada.