Filter
Top Products
7
Serial ATA Port 0 Submenu of the Main Menu
The Serial ATA Port 0 submenu identifies which ATA/
IDE devices are installed.
Note: Actual drive label shown may vary. Depending on the
drive type, information such as cylinders, heads and sectors
may also be displayed.
Figure 3. Serial ATA Port 0 Master Submenu
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [
Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
Menu Field Options Default Description
Type:
■
Auto
■
None
[Auto] Select Auto to have the type of Serial or Parallel ATA device automatically identified
by the BIOS at POST. If None is selected, the following Set-up items do not appear.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
Main Advanced Security Power Boot Info Exit
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Serial ATA Port 0 [MATSHITADVD-RAM UJ-832S-PATA]
Type: [Auto]]
Main Menu