Fujitsu Primergy N800 Barcode Reader User Manual


 
12
Hardware
Hardware List
Product Product ID Remarks
24U Rack PG-R4RC1 19'' 24U Locker , Front door,rear door,side panel,earthquake proof
board, blank panel is attached. Size(WxDxH)mm:600x900x1200
<Number of units required for installation>
N800: 7U
PGUR1DC6: 3U/PGUR1BC3: 3U
Keyboard/Monitor Shelf: 9U(for installation 15''CRT),1U(for installation Keyboard)
Component shelf: 5U
CRT/KB switch: Mounted at side of CRT (occupies same U as CRT)
Color: Black
24U Rack&Rack PG-R4RC2 19''24U Locker + connection metal fittings Front door,rear
Coupling Kit door,concatenation frame,blank panel is attached.
Color: Black
Component Shelf GP5-R1TB7 Shelf to fit peripheral device into 40U Rack, Table size:400(W)x500(D)
Color: Black
Keyboard/Monitor Shelf Kit GP5-R1TB6 Used to store display unit (CRT), a keyboard (KB), and a mouse on a rack.
Color: Black
Keyboard/Monitor GP5-SB101 Switch enables sharing of a set of CRT,keyboard,and mouse by two
Enhanced Switch or more servers (up to four servers).
Keyboard/Monitor GP5-SB102 Switch enables sharing of a set of CRT,keyboard,and mouse by two
Enhanced Switch or more servers (up to eight servers). Shared up to 64 servers in
cascade connection.* AC adapter is required for cascade connection
(Procured locally)
Keyboard/Monitor Cable GP5-418 For connection with switch (For connection GP5-SB102) (5.0m)
Keyboard/Monitor Cable GP5-414 For cascade connection between GP5-SB102 (1.8m)
Keyboard/Monitor Extension Cables GP5-411 CRT/KB cable for connection Server with GP5-SB101,
CRT cablex1,KB/Mouse cablex1 is attached
Enhanced Keyboard GP5-R1KB2 87Key keyboard for Rackmountable type
Flat Display GP5UR1DP11 Rackmountable LCD display with Keyboard, 2U height
<GP5UR1DP1 + GP5-R1RK7>
SCSI Controller UW PG-123 Ultra Wide HVD (High Voltage Differential)/1ch/SMART HDD is not
(SCSI Card)
PGB123 supported/ Up to 40MB/s of synchronous transfer support
[CTO option] <Connector>
- 68-pin connector for external SCSI
- 68-pin connector for internal SCSI
- 50-pin connector for internal SCSI
<Use>
For connection with external Disk Array
* SCSI cable is required.
SCSI Controller U2W PG-126 Ultra2 Wide(LVD)/1ch/SMART HDD/Up to 80MB/s transfer speed
(SCSI Card) PGB126 <Connector>
[CTO option] - 68-pin connector for external SCSI (Ultra2 Wide)
- 68-pin connector for internal SCSI (Ultra2 Wide)
- 68-pin connector for internal SCSI (Ultra Wide)
- 50-pin connector for internal SCSI (Ultra Wide)
<Use>
For connection internal backup device/PRIMERGY S10
RAID Controller U160 2Channels PG-142B RAID Controller, Ultra160/2ch/64MB cache/RAID level 0,1,5,6 (0+1)are supported
(RAID Card) PGB142B For internal/external array configuration
[CTO option]
RAID Controller U160 2Channels PG-142C RAID Controller, Ultra160/2ch/64MB cache/Battery Backup/
(RAID Card) PGB142C RAID level 0,1,5,6(0+1) are supported
[CTO option]
For internal/external array configuration
Standard RAID Controller PGB1U42C1 Convert Standard RAID Controller to PG-142C
Conversion Kit [CTO option] <N800>
SCSI Cable PG-CBLS001
External SCSI Cable [HDCI-HDCI] (1.5m)
<Connection>
- SCSI Controller and S10/External SCSI devices
SCSI Cable PG-CBLS002 External SCSI Cable [HDCI-HDCI] (5m)
<Connection>
- SCSI Controller and S10/External SCSI devices
SCSI Cable PG-CBLS003 External SCSI Cable [HDCI-HDCI] (10m)
<Connection>
- SCSI Controller and S10/External SCSI devices