Filter
Top Products
4
●
Connection Matrix
PRIMERGY N800
Connection of internal HDD and internal backup devices
Internal HDD Backup device
Connection Pattern One device is connected Two devices are connected
Configuration SCSI Host Cable Internal HDD In case that Except for Narrow Wide Narrow device
Interface DDS4 is DDS4 device x 2 device x 2 and
connected Wide device
Up to four HDDs can be Onboard SCSI (Ultra2 Wide Bch)
Array Standard Cable(X2) installed Onboard SCSI PRIMERGY S10 (PGUR1BC3)
Configuration Ultra160 RAID Controller (Ch0/1) (Standard 1) 9GB, 10,000rpm (Ach) SCSI Cable (PG-CBLS007/008/009)
equipment) 2) 18GB, 10,000rpm or
3) 18GB, 15,000rpm SCSI Controller (PG-126)
4) 36GB, 10,000rpm PRIMERGY S10 (PGUR1BC3)
SCSI Cable (PG-CBLS001/002/003)
- In case of SCSI configuration (Up to four HDDs can be mounted), internal DDS4 can be connected to ChA of Onboard SCSI by daisy chain.
- when connecting RAID Controller with PRIMERGY S30, or SCSI Controller with Internal HDD, both SCSI Channel of Onboard SCSI Controller must be connected
to Internal HDD.
Mountable I/O options
N800
Maximum
number
Cards Product ID Bus
of cards
Total REMARKS
mounted
SCSI Controller PG-123 PCI64 4 4
10
For external disk array
(Ultra Wide Diff)
SCSI Controller PG-126 PCI64 2
(Ultra2 Wide LVD)
Fibre Channel Controller PG-FC102 PCI64 4
RAID Controller Standard PCI64 1 5 Mounted in PCI slot1
(Ultra160 LVD) Equipment
RAID Controller PG-142B/C PCI64 4
(Ultra160 LVD)
EthernetController PG-188 PCI64 2 4
(1000Base-SX)
EthernetController Standard PCI64 1 Mounted in PCI slot3
(100Base-TX) Equipment
EthernetController PG-185 PCI64 2
(100Base-TX)
Remote Service Board PGURSB101 PCI64 1
For Remote Management
Channel 0
Ultra2 Wide A
Ultra2 Wide B
Onboard
SCSI
For Internal HDD/PRIMERGYS30
Channel 1
For Internal Backup device/Internal HDD
Standard
RAID Controller
For PRIMERGY S10/Internal HDD
For Internal HDD/PRIMERGYS30
NOTES