Fujitsu S6120D Laptop User Manual


 
13
Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu
Menu Field Options Default Description
Serial Port:
Disabled
Enabled
Auto
[Enabled] Configures the serial port using either no configuration (Disabled), a user
defined configuration (Enabled), or by allowing the BIOS or OS to choose
the configuration (Auto).
I/O Address:
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[3F8 - 3FF] Allows user to set the serial port base I/O address when serial port is
Enabled.
Interrupt:
IRQ 3
IRQ 4
IRQ 10
IRQ 11
[IRQ 4] Allows user to set the serial port interrupt when serial port is Enabled.
Infrared Port:
Disabled
Enabled
Auto
[Enabled] Configures the infrared port using either no configuration (Disabled), a
user defined configuration (Enabled), or by allowing the BIOS or OS to
choose the configuration (Auto).
Mode:
IrDA
FIR
[FIR] When the infrared port is enabled this option is available allowing
the user to set the mode for the infrared port.
I/O Address:
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[2E8 - 2EF] Allows user to set the infrared port I/O address when the infrared port is
Enabled.
Interrupt:
IRQ 3
IRQ 4
IRQ 10
IRQ 11
[IRQ 3] Allows user to set the infrared port interrupt when the infrared port is
Enabled.
I/O Address:
400 - 43F
480 - 4BF
500 - 53F
580 - 5BF
[400 - 43F] Allows the user to select the I/O address for Fast Infrared (FIR).
DMA Channel:
DMA 1
DMA 3
[DMA 3] Allows user to set the infrared port DMA Channel when the infrared port
is Enabled.
Parallel Port:
Disabled
Enabled
Auto
[Enabled] Configures the parallel port using either no configuration (Disabled), a
user defined configuration (Enabled), or by allowing the BIOS or OS to
choose the configuration (Auto).
Mode:
Output Only
Bi-directional
ECP
[Bi-directional] When the parallel port is enabled this option is available allowing the user
to set the mode for the parallel port. Bi-directional allows two-way
transfer of information between your notebook and a parallel device.
Output Only (Half Duplex) allows information to be transferred in only
one direction, from your notebook to the printer or similar device. ECP
Mode allows communication with the ECP class of parallel I/O devices.
I/O Address:
378 - 37F
278 - 27F
3BC - 3BF
[378 - 37F] Allows user to set the parallel port base I/O address when the parallel port
is Enabled.
Interrupt:
IRQ 5
IRQ 7
[IRQ 7] Allows user to set the parallel port interrupt when the parallel port is
Enabled.
Advanced Menu