Filter
Top Products
26
LifeBook S Series Notebook BIOS
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish
to move to another menu, use the cursor keys.
■
Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by
mis
take.
■
Booting from a Thumb (Flash) Drive: To boot up the system using a thumb (flash) drive, perform the
following steps (note that a third party utility is required in order to make the USB drive bootable):
1. Insert the drive into a USB port and power up the system.
2. When the Fujitsu logo appears, press the [F2] key.
3. Go to the Boot tab and scroll down to Boot Device Priority and press the [Enter] key.
4. Arrow down to Hard Disk Drive and press the [Enter] key.
5. Arrow down to select the XXXMB Hard Drive (USB).
6. Press the Space bar until the USB Hard Drive moves to the top of the list.
7. Press the [F10] button, then click Y
es to exit the setup utility.