Filter
Top Products
22
LifeBook S Series Notebook BIOS
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.
Menu Field Options Default Description
Serial ATA Port 0
Password Is::
--- --- A display-only field. Set is displayed when the Serial ATA Port 0 Password is set
and Clear when it is not.
Primary Master
Password Is:
--- --- A display-only field. Not Available is displayed.
Set Serial ATA Port
0 Password
--- [Enter] Sets, changes or cancels Serial ATA Port 0 Password. The password may be up to
seven characters long and include only letters or numbers (no symbols). Passwords
are NOT case- sensitive. To cancel a password press the Enter key instead of enter-
ing characters in the Enter New Password field and in the Re-enter New Password
field. When a Serial ATA Port 0 Password is set it must be used to access the hard
disk. Data on the hard disk cannot be read on other systems.
Set Primary
Master Password
--- [Enter] Not currently available.
Password Entry on
Boot:
■
Disabled
■
Enabled
[Disabled] When this is disabled, it is not necessary to enter the password before booting.The
hard disk is still password-protected without entering a password.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
PhoenixBIOS Setup Utility
Hard Disk Security
Serial ATA Port 0 Password Is: Clear
Primary Master Password Is: Not Available
Set Serial ATA Port 0 Password [Enter]
Set Primary Master Password [Enter]
Password Entry on Boot: [Disabled]