Filter
Top Products
72
- Device Ports
Internal LAN (RJ-45) Jack
The internal LAN (RJ-45) jack is used for a 10Base-T/100Base-Tx Ethernet LAN connection. You may
need to configure your notebook to work with your particular network. (Please refer to your network
administrator for information on your network configuration.) To connect the LAN cable follow these
easy steps:
Universal Serial Bus Ports
The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads,
pointing devices, keyboards and/or speakers. There are three USB 2.0 ports on your notebook: two on the
right side and one on the rear.
In order to connect a USB device follow these steps:
1 Align the connector with the port openin, then push the connector into the port until it is seated.
1 Align the connector with the port
opening.
2 Push the connector into the port
until it is seated.
3 Plug the other end of the cable into
a LAN outlet.
Figure 29. Connecting LAN Device
D
UE TO THE ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES
AND/OR DRIVERS ARE GUARANTEED TO WORK.
LAN Port