Filter
Top Products
Ethernet 100 Base-TX
Autopilot
Autopilot
GPS Navigator
GPS Navigator
SDME
SDME
FEATURES of ECDIS
ENC IHO S57 Edition 3
Optional pedestal
sThe electronic chart can be overlaid with a variety of navigation data such as Radar echo
images, ship’s position, heading, speed and others to facilitate safe and efficient navigation.
sComplies with the following IMO and IEC regulations:
• IMO A.817(19) • IMO MSC.64(67) Annex 5
• IMO MSC.86(70) Annex 4 • IMO A.694(17)
• IEC 61174 edition 2 • IEC 60945 edition 4
• IEC 61162-1 edition 2 • IEC 61162-2 edition 1
sCompatible with ENC (S57 Edition 3) charts, ARCS charts and C-MAP CM93 ed3*
*available in the near future
sFlexible expandability allows the ECDIS to be networked with radar/ARPA, positioning
equipment, autopilot and others to consolidate the navigation system
sUser-customizable chart drawing function
sRoute planning applicable to both
Mercator’s sailing and great-circle sailing
sTrack Control System when connected
with autopilot
(Option)
sNavigation data for the past 12 hours
can be recorded
(The data to be recorded includes: time, ship’s position,
GPS correction data, ship’s heading, ship’s speed)
sTrue Motion and Relative Motion modes are
available
sErgonomically designed control panel provides
ease-of-use
The ergonomically designed control panel consists of
a trackball, a thumbwheel and a keyboard. The logically
arranged keyboard provides intuitive operation. Optionally,
the compact control head only with a trackball and
a thumbwheel is available for space-saving installation.
sNavigation data is shared within an Ethernet network
The 100 Base-T Ethernet is utilized to link
this ECDIS with up to four sets of radar/ARPA
FAR-21x7/28x7. This link gives high-speed
navigational data sharing within the system
and allows operators to choose either a single
station system or a total Integrated Navigation
System (INS).
sHigh-resolution color LCD
The use of 20.1"/23.1" high-resolution SXGA/UXGA LCDs
provide crystal clear presentations of navigation
information, such as marks, lines and waypoints.
The LCDs also allows for installation where space is limited.
sDisplays 200 AIS targets
When connected to an optional AIS transponder,
the FEA-2107/2807 can store up to 1,000 AIS
targets information in its storage buffer, and
displays up to 200 AIS targets within the user-
defined range on the display. This provides
operators with another solution for observation
of other craft.
sStreamlined design
The color scheme of the optional
pedestal is a stylish pearl white and
gray. The streamline design fits
perfectly in the modern bridge.
A flexible Ethernet network
allows for future expandability
Palm control unit
Sleeping AIS Target
Activated Target Lost Target Dangerous TargetSelected Target