Filter
Top Products
TCP/IP Print Server – Changing TCP/IP or Host Access Configuration (10/29/01 mlr) 4
Accessing the TCP/IP Print Server Configuration Utility
From the Print Server Monitor Screen, press the F3 key to exit to a DOS prompt. From a DOS
prompt:
Type “1” and Press ENTER.
If the configuration screen did not appear, locate the RIC directory on the Print Server’s hard
drive. A typical Print Server would have the directory at “C:\RIC”. Using the DOS Change
Directory command “CD\RIC”, change to the RIC directory. Type “PRTCNF” and Press
ENTER
MENUS
FILE SAVE | BACKUP | RESTORE | PRINT | EXIT
CONFIGURE
IP STACK | NETWORK PARAMETERS | PRINTER PORTS | MANUAL
OVERRIDE
HELP
IMPORTANT!! Always SAVE changes to configurations BEFORE
exiting the Print Server Configuration Utility.
TCP/IP Print Server Configuration Utility
File Configure Help