Filter
Top Products
Magnum Quad-Series Fiber Switches Installation and User Guide (06/03)
3. Use the LINK LED to ensure proper connectivity by noting that the LED will be
illuminated when the unit is powered and proper connection is established
3.3 Table-Top or Shelf Mounting
The Magnum Quad-Series Switches can be easily mounted on a table-top or
any suitable horizontal surface, and has four rubber feet to provide stability without
scratching finished surfaces.
3.3.1 Wall (or Vertical Surface) Mounting, 8-port QS580
Each Magnum QS580 Switch is shipped with two metal mounting brackets
(and screws) to allow the unit to be mounted in nearly any desired orientation or position.
The brackets are attached to the metal switch case using one of the metal screws for each
bracket, and attached to the Magnum QS580 through the round hole of the bracket. A
user-supplied screw attaches the bracket to the mounting surface. It is recommended that
the mounting brackets be attached to two opposite corners of the unit. When properly
attached, the brackets will extend slightly below the base of the unit to allow clearance
for the rubber feet and for cooling fan exhaust space.
MagnumQS58
mounting
0, optional
brackets
Proper mounting
bracket attachment
GARRETT
100 Mb/s
Magnum QS580
Fiber Switch
GARRETT
Figure 3.1: Magnum QS580, metal mounting brackets
3.3.2 Rack-mounting, models QS5108 and QS5116
Installation of a Magnum QS5108 and QS5116 mixed-media fiber Switch in a
19” rack is a simple procedure.
The units are 1U (1.70”) high.
When properly installed, the
front-mounted LED status
indicators should be in plain
view and easy to read. Rack-mount installation requires special 19” rack-mounted
Magnum QS5116
Fiber Switch
TT
Magnum QS5116
GARRE
PWR
100/10
FDX/HDX
LK
ACT
100/10
2
3
1
FDX/HDX
4
LK
100/10
2
3
1
FDX/HDX
4
ACT
LK
ACT
ACT
Fiber Switch
ACT
2
3
1
4
LK
FDX/HDX
Magnum QS5116
18
www GarrettCom com
..