Filter
Top Products
TB14 and TB14H 10Mb Media Converters Installation and User Guide (09/04)
33
www GarrettCom com
..
1. Using standard 10BASE-T media, insert either end of the cable with an RJ-45
plug into the RJ-45 connector of the Magnum Media Converter.
2. Connect the other end of the cable to the corresponding device.
Use the LINK LED to ensure proper connectivity by noting that the LED will be
illuminated when the units are powered and proper connections established. If the LINK
LED is not illuminated, change the setting of the up-link switch (See Section 4.6 for up-
link switch information.) If this does not help, ensure that the cable is connected
properly at both ends and is not defective.
3.6.2 Connecting ThinNet (10BASE2)
Note: connect TP media before connecting BNC media if power is on in the
Media Converter unit. See Section 3.6 Connecting Media above.