Filter
Top Products
TB14 and TB14H 10Mb Media Converters Installation and User Guide (09/04)
40
www GarrettCom com
..
The connection procedure is straightforward. Simply insert the DC leads to the
TB14H’s power terminals, positive (+) and negative (-) screws. The use of Ground
(GND) is optional; it connects to the TB14H chassis. Ensure that each lead is securely
tightened from the top, as shown here.
NOTE: Always use a voltmeter to
measure the voltage of the incoming
power supply and figure out the +ve
potential lead or -ve potential lead. The
more +ve potential lead will connect to
the post labeled “+ve” and the rest to the
“-ve”.
The GND can be hooked up at the last.
When power is applied, the green PWR LED will illuminate.