Filter
Top Products
34
Using the Gateway 205 Projector
www.gateway.com
Display image is wider on the top or bottom
■ Press the KEYSTONE buttons on the remote control to adjust the display
image. For more information, see “Remote back” on page 14.
■ Reposition the projector to get a better angle on the projection screen.
Display image is poor or blurred
■ If the projector is connected to your computer, press the AUTO button on
the remote control to automatically adjust the display image to the ideal
settings.
■ Use the lens adjustment wheel to manually focus the display image.
■ Use the OSD menus to adjust the brightness and contrast. For more
information, see “OSD options” on page 23.
■ Reposition the projector to get a better angle on the projection screen.
Remote control does not work
■ Make sure that you are less than 29.5 feet (9 meters) from the infrared
remote sensors on the front and back of the projector.
■ Make sure that nothing is blocking the infrared remote sensors on the front
and back of the projector.
■ Replace the batteries in the remote control. For information on replacing
the batteries, see “Remote control” on page 11.